0
0

BMW FEM/BDC Авторизация для xHorse VVDI2

Отзывы:
(0)
  • Производитель: xHorse
  • Артикул: 100405
  • Наличие: Есть в наличии
7 200 грн.
Оплата

Наложенный платеж, Наличными в офисе, Безналичный расчет

Доставка

В тот же день при заказе до 16:00. Новая Почта, Гюнсел, Самовывоз из офиса в рабочее время

Гарантия

Только проверенное оборудование с поддержкой

BMW FEM/BDC Authorization for xHorse VVDI2  

This authorization  for  VVDI2 not  bind to Condor XC MINI

Pls note:

1.Your vvdi2 must already has BMW OBD function
2.No real shipping. After payment, pls give us serial number of VVDI2


VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

BMW FEM/BDC Авторизация для xHorse VVDI2

Отзывов (0)

Нет отзывов о данном товаре.

Вопросы (0)

Нет вопросов о данном товаре, станьте первым и задайте свой вопрос.

Рекомендуемые
НУЖНО УСТАНОВИТЬ ПРОГРАММЫ ДЛЯ АВТОДИАГНОСТИКИ?
Установка, обновление и настройка диагностических программ на Ваш или наш ноутбук.
Смотреть
НУЖНО УСТАНОВИТЬ ПРОГРАММЫ ДЛЯ АВТОДИАГНОСТИКИ?