Моя корзина

BMW FEM/BDC Авторизация для xHorse VVDI2

Оплата при получении товара
Доставка по всей Украине
При заказе до 16-00 отправка в тот же день
Гарантия

Добавить отзыв

22 133 грн.

Есть в наличии

BMW FEM/BDC Авторизация для VVDI2 Slide loader...

  • BMW FEM/BDC Авторизация для VVDI2
  • BMW FEM/BDC Авторизация для VVDI2
  • BMW FEM/BDC Авторизация для VVDI2
   

BMW FEM/BDC Authorization for VVDI2  

This authorization  for  VVDI2 not  bind to Condor XC MINI

Pls note:

1.Your vvdi2 must already has BMW OBD function
2.No real shipping. After payment, pls give us serial number of VVDI2


VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

  • Не будет опубликован. Только для извещения об ответе на отзыв.

Оставьте отзыв о товаре

  • Не будет опубликован. Только для извещения об ответе на отзыв.


Доставка:

осуществляется по Украине и г.Киеву, а также по СНГ. Подробная информация.


Оплата:

Подробная информация.

  • На этот адрес будет отправлено сообщение в случае недозвона.